Boating and Sailing Accessories

Fuel Tanks

• Used by leading boat builders • Individually tested for quality assurance • State-of-the-art construction Manufactured from marine-grade cross-linked polyethylene material, these durable below-deck tanks meet and exceed all industry standards. Moeller permanent fuel tanks are equipped with a Stewart Warner electric sending unit, a 1/4' NPT aluminum withdrawal, and a barbed vent. Not for use with diesel fuel. Please allow 2-1/2' for fittings. Tank capacity: 28 gallons. Dimensions: 24-1/2'W x 49'L x 8'D.

Imtra Corporation Flexible Diesel Fuel Tanks 24ga, 27"l 34"w . Tought 840-denier nylon is coated with a chemical and odor resistant neoprene/bitrile coating. This allows them to be used as waste holding tanks, too. Sine the tanks collapse as the fuel consumed, there is far less air in the tank to cause condensationa nd contamination. When all the fuel has been drawn off, simply roll up the tank and stow. Fittings are owner-installed Fittings are sold separately

Rds Manufacturing Above Deck Aluminum Fuel Tank 13 Gallon . Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA, RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. before welding, all aluminum parts are bathed in acid to eliminate any contamination that might weaken a weld or create the potential for leakage. Side corners are radius bent, not welded All Tanks-have 1/4" NPT pickup, 1-1/2" fill, and 1/2" vent fittings Add 3" to height for fittings All are fitted with plugs for diesel return Above-Deck Tanks have vented caps with gauge units Below-Deck Tanks have electrical sending units... Less

032527 FUEL TANK PERMANENT 27 GAL (640050)MOELLER MARINE PRODUCTSEach fuel tank is equipped with our state-of-the-art electrical sending unit that is compatible with 35-240 ohm industry standard dash mounted gauges. Vent boss is barbed to provide a secure hose fit. A female 1/4' NPT 90e‚° withdrawal rotates 360e‚° to aid during installation of fuel hose. It is recommended that 3% to 5% expansion areas be allotted in all directions when installing tank. 27 Gallon built-in fuel tank. Tank constructed from cross link polyethylene requires no baffles Fill neck uses 1-1/2' I.D. fill hose vent uses 5/8' I.D. vent hose Ideal for gasoline or diesel Measures 36.5' L x 16' W x 11.75' H.

6-gallon (22.7 litre) EPA portalble fuel tank, 20.50"L x 12.75"W x 10.5" H w/Cap

Vetus permanent diesel fuel tanks made of rigid linear polyethylene for safe and durable mounting below decks.

Moeller 18 - gallon Topside Fuel Tank with Gauge Click image to enlarge... Designed specifically for use in Boston Whalers, Carolina Skiff and Key West bench styles plus center console, pontoons and deck and jon boat designs. Fill 'er up: Provides positive seal with Moeller- exclusive injection molded 2 1/4 fill neck Mechanically vented fuel cap ensures easy gripping with exclusive ribbed design that floats Features 90 degree, 1/4 NPT fuel withdrawal elbow that rotates 360 degrees eliminating a kinked fuel line hose Includes mechanical direct-sight gauge with easy-to-read indicator. 43 x 15 x 8 h. Order ONLINE Now. Moeller 18-gallon Topside Fuel Tank

032612 FUEL TANK PERMANENT 12 GAL (640020)MOELLER MARINE PRODUCTSEach fuel tank is equipped with our state-of-the-art electrical sending unit that is compatible with 35-240 ohm industry standard dash mounted gauges. Vent boss is barbed to provide a secure hose fit. A female 1/4' NPT 90e‚° withdrawal rotates 360e‚° to aid during installation of fuel hose. It is recommended that 3% to 5% expansion areas be allotted in all directions when installing tank. 12 Gallon built-in fuel tank. Tank constructed from cross link polyethylene requires no baffles Fill neck uses 1-1/2' I.D. fill hose vent uses 5/8' I.D. vent hose Ideal for gasoline or diesel Measures 20' L x 14' W x 11.75' H.

Topside Fuel Tank 15 Gals. Topside Fuel Tank 15 Gals Made by: Moeller Part Number: 5903402

Moeller Gas Walker 29 Gallon Fuel Tank Item Details and Description The 14 and 29 gallon capacity Gas Walkers meet US requirements for transporting gasoline. Gravity fed at 3.5 gallons per minute with brass shut-off valve to safely control fuel flow and prevent accidental discharge. Includes 3/4" Inch hose with a cast aluminum nozzle. Durable crosslinked polyethylene construction UV inhibitors Dimensions 19.5" W x 19.5"D x 43" H Part # MOE730025 Looking for different size? Stop by our ebay stor

Rds Manufacturing Below Deck Aluminum Fuel Tank 32ga . Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA. RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. Before welding, all aluminum parts are bathed in acid to eliminate any contamination that might weaken a weld or create the potential for leakage. Side corners are radius bent, not welded All Tanks-have 1/4" NPT pickup, 1 1/2" fill, and 1/2" vent fittings Add 3" to height for fittings All are fitted with plugs for diesel return Above-Deck Tanks have vented caps with gauge units Below-Deck Tanks have electrical sending units &... Less

Rds Manufacturing Below Deck Aluminum Fuel Tank 26ga . Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA. RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. Before welding, all aluminum parts are bathed in acid to eliminate any contamination that might weaken a weld or create the potential for leakage. Side corners are radius bent, not welded All Tanks-have 1/4" NPT pickup, 1-1/2" fill, and 1/2" vent fittings Add 3" to height for fittings All are fitted with plugs for diesel return Above-Deck Tanks have vented caps with gauge units Below-Deck Tanks have electrical sending units &... Less

Moeller Below Deck permanent marine fuel tanks made of seamless, corrosion resistant polyethylene. Aluminum fill spouts, withdraw and vent fittings molded directly into the shell. All tanks accept 1-1/2" fill and 5/8" vent hose.

Todd V Bottom Polyethylene Fuel Tanks 55 Gallon Belly . These rugged permanent tanks are molded of gray cross-linked polyethylene for strength and no-leak durability. Each tank is individually inspected and tested to assure its quality. Includes electronic fuel-level sending unit and fuel withdrawal fitting. Meet NMMA and USCG non-commercial standards Made to hold Gasoline only 40 G: 51"L x 25 3/4"W x 13"H 55 G: 51"L x 25 1/2"W x 16"H

032514 FUEL TANK PERMANENT 14 GAL (640060)MOELLER MARINE PRODUCTSEach fuel tank is equipped with our state-of-the-art electrical sending unit that is compatible with 35-240 ohm industry standard dash mounted gauges. Vent boss is barbed to provide a secure hose fit. A female 1/4' NPT 90e‚° withdrawal rotates 360e‚° to aid during installation of fuel hose. It is recommended that 3% to 5% expansion areas be allotted in all directions when installing tank. 14 Gallon built-in fuel tank. Tank constructed from cross link polyethylene requires no baffles Fill neck uses 1-1/2' I.D. fill hose vent uses 5/8' I.D. vent hose Ideal for gasoline or diesel Measures 18' L x 11.75' W x 16.25' H.

Rds Manufacturing Above Deck Aluminum Fuel Tank 18ga . Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA. RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. Side corners are radius bent, not welded. For gas applications simply plug the diesel return with a 1/4 NPT plug. Add 3 to height for fittings. Gasoline or diesel fuel. Above-Deck Tanks have removable caps and vented sight gauge units in tank. Style: Above Deck Material: Aluminum Capacity: 18 Gal. Dimensions :24 1/2"L x 16 3/8"W x 10 3/8"H Fitting Type: 1/4" NPT pickup, 1 1/2" fill, 5/8" vent, 3/8" return fitting for diesel... Less

Metal construction Holds tank in place 4 straps per kit. Tanks marked with HD use this kit.

Imtra Corporation Flexible Diesel Fuel Tanks 37ga, 27"l 46"w . Tought 840-denier nylon is coated with a chemical and odor resistant neoprene/bitrile coating. This allows them to be used as waste holding tanks, too. Sine the tanks collapse as the fuel consumed, there is far less air in the tank to cause condensationa nd contamination. When all the fuel has been drawn off, simply roll up the tank and stow. Fittings are owner-installed Fittings are sold separately

Rds Manufacturing Below Deck Aluminum Fuel Tank 13ga . Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA. RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. Before welding, all aluminum parts are bathed in acid to eliminate any contamination that might weaken a weld or create the potential for leakage. Side corners are radius bent, not welded All Tanks-have 1/4" NPT pickup, 1 1/2" fill, and 1/2" vent fittings Add 3" to height for fittings All are fitted with plugs for diesel return Above-Deck Tanks have vented caps with gauge units Below-Deck Tanks have electrical sending units &... Less

Rds Manufacturing Below Deck Aluminum Fuel Tank 18ga . Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA. RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. Before welding, all aluminum parts are bathed in acid to eliminate any contamination that might weaken a weld or create the potential for leakage. Side corners are radius bent, not welded All Tanks-have 1/4" NPT pickup, 1 1/2" fill, and 1/2" vent fittings Add 3" to height for fittings All are fitted with plugs for diesel return Above-Deck Tanks have vented caps with gauge units Below-Deck Tanks have electrical sending units &... Less

Designed to fit center console, pontoon, deck and Jon boats. They feature a unique fuel withdrawal assembly with 90 degree elbow for easy installation of connector. These tanks are ideal for center console, pontoon, deck and jon boats.

Moeller Below Deck permanent marine fuel tanks made of seamless, corrosion resistant polyethylene. Aluminum fill spouts, withdraw and vent fittings molded directly into the shell. All tanks accept 1-1/2" fill and 5/8" vent hose.